Access To The Diq/S 28X With Active Access Control - Xylem WTW DIQ/S 281 Operating Manual

Operation
52
10  Add a new character
Select the character to be added with
<OK>
.
or
 Delete the last character
Select the character with
or
 Adopt the name
Select the character with
11 Repeat steps 8 to 10 until the whole name has been entered.
You can break off entering the name with
retained.
4.3

Access to the DIQ/S 28X with active access control

Access control is switched off in the delivery condition. No login to
the DIQ/S 28X is required.
As soon as an access control of any type is enabled, access to the DIQ/S 28X
is protected completely or partly.
Access to the system is enabled as follows:
 Connecting the electronic key to the USB interface (Universal Transmitter),
if the administrator has enabled this function
 Entering a password
Extended access control:
In the Display/Options / Change user rights menu, enter the
password with the arrow keys and confirm with OK.
Extended access control with instrument block:
Press the any button.
In the password query, enter the password with the arrow keys
and confirm with OK.
<

< >
 and confirm with
< >

and confirm with
<ESC>
ba77244d01
DIQ/S 281
>
and confirm with
<OK>
.
<OK>
.
. The old name is
08/2020