Xylem WTW DIQ/S 281 Operating Manual page 69

DIQ/S 281
Validity
For the instru-
ment on which
the function
was activated
Switching on the
access control
ba77244d01
User right
Maintenance
Viewer
Instrument
block
1 Open the Einstellungen/Settings menu with
<
2 Using 
Access control.
The Extended access control dialog window opens.
User right and instrument block can be selected.
figure 5-3 Einstellungen/Settings -> Access control -> Extended access control
The instrument automatically generates a password for each user right. This
password can be accepted or changed.
08/2020
Symbol User rights
 Access only with password
 Calibration
 View measured values
 Without instrument block:
Access without password
 With instrument block:
Access only with password
 View measured values
 Instrument block switched off:
User rights as for Viewer.
 Instrument block active:
The DIQ/S 28X is blocked. Only the
IQ S
ENSOR
Access only with password.
> <OK>
and , select and confirm the menu item,
Settings/setup
N logo is displayed.
ET
<S>
.
69