Panel Mounting - Xylem DIQ/S 281 Operating Manual

Installation
Mounting the DIQ/
S 281 on a top hat
rail
38
figure 3-22 Mounting the DIQ/S 281 on a top hat rail
1 Screw the clamping assembly (pos. 1 in figure 3-22) on the back of the
universal transmitter with the two plastic tapping screws (pos. 2).
2 Attach the universal transmitter to the top hat rail from above using the
clamping assembly and press against the rail until the clamping
assembly clicks into place. The universal transmitter can be moved
sideways afterwards.
3 To unhook the universal transmitter, press it downward and pull it
forward at the bottom.
3.6.5

Panel mounting

Variants of the DIQ/S 281 without fieldbus interface can be mounted to a switch
panel with the PMS/IQ mounting set.
For variants of the DIQ/S 281 with fieldbus interface, we recommend using the
PMS/IQ-X mounting set. It enables to mount the DIQ/S 281 in the switch panel
so that the fieldbus interface is accessible behind the switch panel.
DIQ/S 281
1
2
ba76226e02
03/2023