Swing End Assembly - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 4: Swing End Assembly
A: Attach 2 (1863) SW Posts to (1856) SW Upright using 2 (G4) 5/16 x 4" Hex Bolts (with lock washer, flat
washer and t-nut). (fig. 4.1)
Fig. 4.1
B: Attach (1862) SW Support to both (1863) SW Posts and (1856) SW Upright using 3 (G5) 5/16 x 4-1/2" Hex
Bolts (with lock washer, flat washer and t-nut). (fig. 4.1)
Wood Parts
2 x SW Post 2 x 4 x 86-11/16"
1863
1 x SW Support 5/4 x 4 x 46-1/2"
1862
1 x SW Upright 2 x 4 x 48-5/16"
1856
5/16"
T-Nut
1863
G5
1863
2 x
G4
3 x
G5
1862
Hardware
5/16 x 4" Hex Bolt
(5/16" lock washer, 5/16" flat washer, 5/16" t-nut)
5/16 x 4-1/2" Hex Bolt
(5/16" lock washer, 5/16" flat washer, 5/16" t-nut)
23
1856
5/16"
T-Nut
5/16" Lock
Washer
5/16" Flat
Washer
5/16" Lock
Washer
5/16" Flat
Washer
G4