Attach Ground Stakes; Attach Stakes - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 16: Attach Ground Stakes
STEP 6 -PartIII - Attach Stakes
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND
STEP 6 -PartIII - Attach Stakes
be driven 10-1/2" into ground. Digging or driving stakes can be dangerous
if you do not check first for underground wiring, cables or gas lines.
A: Drive 1 (0318) Ground Stake 10-1/2" into the ground at both (0369) Lower Diagonals and 1 on the Slide
Wall Side tight to (2336) Centre Post and (2189) SL Ground as shown in fig. 16.1. Attach using 2 (S3) #8 x
2-1/2" Wood Screws per ground stake. (fig. 16.2)
Fig. 16.1
Slide Wall
Fig. 16.2
Wood Parts
3 x Ground Stake 1-1/4 x 1-1/2 x 14"
0318
WARNING:
To prevent tipping and avoid potential injury, stakes must
Parts removed
for clarity
S3
0318 10-1/2" Into Ground
6 x
0369
2189
Hardware
#8 x 2-1/2" Wood Screw
S3
40
2336
0369