Glider Assembly - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 32: Glider Assembly
A: Attach 1 Glider End to the Glider Seat using 1 5/16" Glider Long Hex Bolt (with 2 flat washers and 1 lock
nut). Repeat for the second Glider End. (fig. 32.1)
B: Install 2 Glider Rope with Chains into each Glider End using 2 - 5/16" Flat Washers and 1 Lock Nut per rope.
(fig. 32.1)
Fig. 32.1
5/16 x Glider
Long
Hex Bolt
Glider Seat
WARNING:
exceed 1/2 thread past the nut
5/16 Flat
Washer-Zinc
5/16 Lock
Nut
Glider End
Bolt must not
2 x
8 x 5/16" Flat Washer
4 x 5/16" Lock Nut
Glider Rope
and Chain
Hardware
5/16" Glider Long Hex Bolt
(5/16" flat washer x 2, 5/16" lock nut)
82
Glider may not be as
shown.
Appearance may vary.
5/16 Flat
Washer-Zinc
5/16 Lock Nut
5/16 Flat
Washers
5/16 Lock
Nuts
Other Parts
2 x Glider End
1 x Glider Seat
1 x Glider Rope and Chain (pkg of 4)