Lower Swing Wall Assembly - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 22: Lower Swing Wall Assembly
Part 1
A: Tight to top of (2184) SW Ground and flush to the outside edges of both
(2180) Posts attach 1 (2193) Siding to both (2180) Posts with 2 (S0) #8 x
7/8" Truss Screws, as shown in fig. 22.1 and 22.2.
B: Install 5 more (2193) Siding directly above the first, attaching to both
(2180) Posts, making sure there are no gaps between boards, with 2 (S0)
#8 x 7/8" Truss Screws per board. (fig. 22.2)
C: Tight to the top of the last (2193) Siding attach (2190) Wall Board to
both (2180) Posts with 4 (S1) #8 x 1-1/8" Wood Screws. (fig. 22.3)
Fig. 22.2
2180
Wood Parts
6 x Siding 3/8 x 3-1/2 x 38-1/2"
2193
1 x Wall Board 1 x 4 x 38-1/2"
2190
2193
S0 x 2 per
board
12 x
4 x
2180
2184
2180
2193
Hardware
#8 x 7/8" Truss Screw
S0
#8 x 1-1/8" Wood Screw
S1
61
Fig. 22.1
Swing Wall
Fig. 22.3
S1
2180
2190