Variables In Syslog Messages - Siemens SIMATIC RF185C Operating Instructions Manual

Syslog messages
B.2 Variables in Syslog messages
Note
Additional information
You can find additional information on the structure of Syslog messages and the meaning of
the parameters in the RFC 5424.
https://tools.ietf.org/html/rfc5424
B.2

Variables in Syslog messages

The variables are displayed in the "Syslog messages" section in the "Message text" field with
curly brackets {variable}.
The output messages can contain the following variables:
Table B- 2 Possible variables in Syslog messages
Variable Description
{Ip address} IPv4 address to RFC1035
{Protocol} Layer 4 protocol used or service that has generated
the event.
{User name} Character string (without spaces) that identifies the
authenticated user based on the name.
{Action user Identifies the user based on his/her name This is not
name} or the authenticated user.
{Destination
user name}
{Role} Symbolic name for the group role.
{Time Number of seconds
second}
{Max Maximum number of sessions
sessions}
{Url} URL of the Web server that was accessed.
{Config Character string (with spaces) for the configuration.
detail}
202
Format Possible values or exam-
ple
%d.%d.%d.%d 192.168.1.105
XXX.XXX.XXX.XXX
%s TCP | WBM | PNIO | PB
| OPC | EIP
%s <name>
%s <First name>.<Name>
%s Administrator | User | OPC
UA
%d 44
%d 10
%s /Engineering/Reset2Facto
ry?r=0.685644556250803
3
%s Power
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03