Simaticidentmodelversion; Commonsettings - Siemens SIMATIC RF185C Operating Instructions Manual

10.2.3

SimaticIdentModelVersion

Table 10- 5
Path
Data type
Access
Description
Possible values
10.2.4

CommonSettings

You can make basic settings on the communication module using these variables.
Table 10- 6
Path
Data type
Access
Description
Possible values
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
SimaticIdentModelVersion
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Sima
ticIdentModelVersion
String
R
Indicates the version of the OPC UA module.
Example:
V1.1.0
CodeTypes
Root/Objects/DeviceSet/Read_point_x/RuntimeParameters/Com
monSettings/CodeTypes
UInt32
R/W
Definition of the data type for all AutoID identifiers in "AutoID
Standard".
The setting has an effect specifically on the data type of the
"LastScanData", variable, the "Identifier" diagnostics variable and
the "ScanData" union used for the "Identifier" in methods or
events.
The types "String", "ByteString" and "ScanDataEpc" are support-
ed. The type definition of "CodeTypes" is "MultiStateDiscrete-
Type". This means that the variable has an "Enum" that indicates
the supported data types as "Property".
•
•
•
0: ByteString
1: String
2: ScanDataEpc
Programming via OPC UA
10.2 OPC UA variables
123