The Menu Command "System - Reader Firmware; The "Help" Menu Item - Siemens SIMATIC RF185C Operating Instructions Manual

Configuring with the WBM
7.3 The menu items of the WBM
7.3.13

The menu command "System - Reader firmware"

In the "System - Reader Firmware" menu item, you can update the firmware of the readers
connected to the communication module.
● Basic settings
● Firmware update
Figure 7-20 The menu command "System - Reader firmware"
Basic settings
In this area, you can use the "Reader interfaces" parameter to specify the reader for which a
firmware update is to be performed. Depending on the connected reader, you can select the
desired reading point.
Firmware update
In the "Firmware update" area, you can update the firmware of the selected reader. For a
detailed description of firmware updates, refer to the section "Firmware update (Page 166)".
7.3.14

The "Help" menu item

Service and Support
The "Help - Service and Support" menu item includes information on the RF18xC und
RF18xCI communication modules, the WBM as well as links to the relevant documents and
the Siemens Industry Online Support.
Operating Instructions
With the "Help" menu item, you can find the manual for the corresponding communication
module, "SIMATIC RF185C, RF186C RF188C, RF186CI, RF188CI".
110
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03