Siemens SIMATIC RF185C Operating Instructions Manual page 151

Procedure
Reading out diagnostics information of the communication module
Proceed as follows to read the diagnostics information of the communication module using
STEP 7 Basic / Professional (TIA Portal):
1. Change to the network view.
2. Right-click on the desired communication module and click on "Online & Diagnostics" in
the shortcut menu.
3. Select the "Diagnostics" parameter group.
The diagnostics window provides you with the following options for diagnostics of the
communication module:
– The identifier and the firmware version of the communication module are displayed
– Under the "Diagnostic status" entry, you can see the current status information of the
– Under the "PROFINET interface" entry, you can find status information and further
Figure 12-2 Display of the diagnostics information of the communication module
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
under the "General" entry.
communication module.
information about the PROFINET interface.
Service and maintenance
12.1 Diagnostics
151