Variables In Syslog Messages - Siemens SIMATIC RF1100 Operating Instructions Manual

Syslog messages
B.2 Variables in Syslog messages
Note
Additional information
You can find additional information on the structure of Syslog messages and the meaning of the
parameters in the RFCs:
https://tools.ietf.org/html/rfc5424
https://tools.ietf.org/html/rfc5426
B.2

Variables in Syslog messages

The variables are displayed in the "Syslog messages" section in the "Message text" field with curly
brackets {variable}.
The output messages can contain the following variables:
Table B-2 Possible variables in Syslog messages
Variable Description
{Ip address} IPv4 address to RFC1035
{Protocol} Protocol used or service that has generated the event. %s
{User name} Character string (without spaces) that identifies the au‐
thenticated user based on the name.
{Action user Identifies the user based on his/her name This is not the
name} or authenticated user.
{Destination
user name}
{Role} Symbolic name for the group role.
{Time sec‐ Number of seconds
ond}
{Max ses‐ Maximum number of sessions
sions}
{Url} URL of the Web server that was accessed.
{Config de‐ Character string (with spaces) for the configuration.
tail}
94
Format Possible values or exam‐
ple
%d.%d.%d.%d 192.168.1.105
XXX.XXX.XXX.XXX
TCP | WBM | PNIO | PB | OPC |
EIP
%s <name>
%s <First name>.<Name>
%s Administrator | User | OPC
UA
%d 44
%d 10
%s /Engineering/Reset2Facto‐
ry?
r=0.6856445562508033
%s Power
Operating Instructions, 08/2023, C79000-G8976-C698-02
SIMATIC RF1100