Siemens SIMATIC RF185C Operating Instructions Manual page 141

Table 10- 38 PC
Data type
Description
Possible values
Table 10- 39 Polarization
Data type
Description
Possible values
Table 10- 40 Strength
Data type
Description
Possible values
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
UInt16
Protocol Control Word of the transponder that was accessed last.
This variable is only supported by UHF readers.
Example:
3000
String
Polarization with which the last command was executed on the
transponder. This variable is only supported by UHF readers.
Default
•
Circular
•
Linear_vertical
•
Linear_horizontal
•
Int32
RSSI value with which the last command was executed on the
transponder. This variable is only supported by UHF readers.
0 ... 255
Programming via OPC UA
10.3 OPC UA events
141