Programming Via Rockwell Controller - Siemens SIMATIC RF185C Operating Instructions Manual

Programming via Rockwell controller

This section is intended only for Rockwell users.
You can program the communication modules using add-on instructions via a Rockwell
controller. With the described functions, you can read out and write transponder data via the
connected readers. You can find a detailed description of the Ident profile and the add-on
instructions in the "Ident profile and Ident blocks, standard function for Ident systems
(https://support.industry.siemens.com/cs/ww/en/view/109762333)" function manual.
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
11
143