Certificates & Approvals - Siemens SIMATIC RF185C Operating Instructions Manual

A.6 Certificates & approvals
Note
Granted approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Current approvals
SIMATIC NET/SIMATIC Ident products are regularly submitted to the authorities and
approval centers for approvals relating to certain markets and applications.
Contact your Siemens representative if you need a list of the current approvals for the
individual devices or check the Internet pages of Siemens Industry Online Support:
Current approvals (https://support.industry.siemens.com/cs/ww/en/ps/15728/cert)
Go to the relevant product there and select the "Certificates" entry type from the "Entry list"
tab.
Overview of the approvals and standards
The RF185C/RF186C/RF188C/RF186CI/RF188CI communication modules have the
following approvals and meet the following standards:
● EC directives and standards
– EU directive 2014/30/EU "Electromagnetic Compatibility" (EMC directive) according to
– EU Directive 2011/65/EU "Restriction of the use of certain hazardous substances in
● cULus LISTED IND. CONT. EQ.
● FCC
EU Declaration of Conformity
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
the following standards:
EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 55032, EN 55024
electrical and electronic equipment" (RoHS)
The RF185C/RF186C/RF188C/RF186CI/RF188CI communication modules
meet the general and safety-related requirements of the following EU directives
and conform to the harmonized European standards (EN) for programmable
controllers published in the official gazettes of the European Union and here:
Appendix
A.6 Certificates & approvals
199