Siemens SIMATIC RF185C Operating Instructions Manual page 56

Configuring
6.2 Configuration via PROFINET IO
Parameter
Diagnostics
messages
IO mode
1)
This parameter is only included for CI communication modules.
1)
56
Parameter value
None
Hard errors
Hard/soft errors
Input
Output
IO-Link
Default value Description
None With this parameter, you determine the extent
to which the reader-related diagnostic interrupt
messages are to be reported.
•
•
•
Input You use this parameter to specify the mode of
the I/O interface of the communication module:
•
•
•
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
None:
No alarms are generated.
Hard errors:
Critical hardware errors/faults are reported
by the S7 diagnostics.
Hard/soft errors:
Critical hardware faults and errors occurring
when processing commands are reported
by the S7 diagnostics.
Input:
Single digital input
Output:
Single digital output
IO-Link:
Mode for connection of an IO-Link device
with digital inputs/outputs.