Operation Of Optical Handheld Readers, Access Control Readers Or Serial Devices; Compatible Ident Devices; Connecting Handheld Readers / Access Control Readers / Serial Devices - Siemens SIMATIC RF185C Operating Instructions Manual

Hide thumbs Also See for SIMATIC RF185C:
Table of Contents

Advertisement

Appendix
A.3 Operation of optical handheld readers, access control readers or serial devices
A.3
Operation of optical handheld readers, access control readers or
serial devices
The manuals of the relevant devices contain information on the parameterization options for
the devices stated in the following:
● SIMATIC MV320 (https://support.industry.siemens.com/cs/ww/en/ps/15157/man)
● SIMATIC RF1000 (https://support.industry.siemens.com/cs/ww/en/ps/24223/man)
You will find the parameter assignment options of other serial devices in the manuals of the
respective device vendor.
A.3.1

Compatible Ident devices

The following Ident devices can be operated using the communication module via the
Freeport protocol and the RS232 interface:
● SIMATIC MV320
● SIMATIC RF1040R/RF1070R
You can also connect any serial device to the communication module because the
communication module can use the Freeport protocol to communicate with serial devices
(e.g. bar code scanner, intelligent sensor or other automation components with serial
connection). For communication modules with four serial interfaces, only two interfaces
support RS232.
A.3.2

Connecting handheld readers / access control readers / serial devices

Figure A-1
The coiled connecting cable of the optical handheld readers SIMATIC MV320 has a length of
1.6 m. Due to its coiling, it can be extended to a length of 4 m during operation. A
preassembled cable is also available for connection of the SIMATIC RF1040R/RF1070R
readers.
188
Example of a cabling setup
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents