Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens SIMATIC Ident RF622A ETSI
Summary of Contents for Siemens SIMATIC Ident RF622A ETSI
- Page 1 Characteristics Ordering data SIMATIC Ident Installation Integration into RF600 systems RFID systems SIMATIC RF622A Antenna patterns Maximum read/write ranges Operating Instructions Technical data Dimension drawing Approvals & certificates 11/2020 C79000-G8976-C601-01...
- Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 3: Table Of Contents
Table of contents Characteristics ............................5 Ordering data ............................7 Installation ............................. 9 Integration into RF600 systems ......................11 Connecting the antenna ....................11 Radiated power parameter assignment ................13 Antenna patterns ..........................15 Alignment of transponders to the antenna ................. 15 Antenna patterns in the ETSI frequency band .............. -
Page 5: Characteristics
Characteristics SIMATIC RF622A Characteristics Area of application The SIMATIC RF622A is a universal UHF antenna in a compact size for industrial applications in limited installation spaces. Frequency range • 865 to 868 MHz • 902 to 928 MHz Read range max. - Page 6 Characteristics SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...
-
Page 7: Ordering Data
Ordering data Table 2- 1 RF622A ordering data Product Article number SIMATIC RF622A (ETSI) 6GT2812-2EA00 SIMATIC RF622A (FCC) 6GT2812-2EA01 Table 2- 2 Ordering data accessories Product Article number Connecting cable between read- 1 m (cable loss 0.5 dB) 6GT2815-0BH10 er and antenna 3 m (cable loss 1.0 dB) 6GT2815-0BH30 5 m, suitable for drag chains... - Page 8 Ordering data SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...
-
Page 9: Installation
Installation Two holes for M5 screws are provided for mounting the antenna. The maximum screw head diameter is 9 mm. The antenna is suitable for mounting on metallic and non-metallic surfaces. Note Achieving optimum wave propagation To achieve optimum wave propagation, the antenna should not be surrounded by conducting objects. -
Page 11: Integration Into Rf600 Systems
6GT2815-0BH10 (length 1 m), since this cable has the lowest cable loss. Requirement Note Use of Siemens antenna cable To ensure optimum functioning of the antenna, it is recommended that a Siemens antenna cable is used in accordance with the list of accessories. SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01... - Page 12 Integration into RF600 systems 4.1 Connecting the antenna Strain relief To protect the antenna connecting cable from strain, you can attach strain relief, e.g. in the form of a strain relief clamp. The following graphic shows the optimum mounting point for attaching strain relief.
-
Page 13: Radiated Power Parameter Assignment
Integration into RF600 systems 4.2 Radiated power parameter assignment Radiated power parameter assignment Depending on the country or region in which the antenna is being operated, it is subject to regional limitations with respect to the radiated power. Limitations in the EU, EFTA, or Turkey Note Limitation of the radiated power according to EN 302 208 V1.4.1 (ETSI) RF600 systems that are put into operation in the EU, EFTA or Turkey must not exceed the... - Page 14 Integration into RF600 systems 4.2 Radiated power parameter assignment Limitations in China Note Limitation of the radiated power (CMIIT) RF600 systems that are put into operation in China must not exceed the following radiated power with an RF622A antenna: • 2000 mW ERP (or 33 dBm ERP) Converted into EIRP: 3250 mW EIRP (or 35 dBm EIRP) Make the following settings to ensure that the maximum permitted radiated power of the antenna is not exceeded:...
-
Page 15: Antenna Patterns
Antenna patterns Alignment of transponders to the antenna Polarization axis Since the RF622A antenna has linear polarization, it is necessary to consider the alignment of the transponders used in relation to the antenna. The polarization axes of antenna and transponder must always be parallel. The symbol on the antenna indicates the polarization axis. - Page 16 Antenna patterns 5.1 Alignment of transponders to the antenna Alignment The following diagram shows the optimum alignment of the RF600 transponders to the RF622A antenna. Figure 5-2 Optimum alignment of transponders to the antenna SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...
- Page 17 Antenna patterns 5.1 Alignment of transponders to the antenna Angle deviation diagram for alignment The following diagram shows the dependence of the following factors: • Alignment angle of transponder to antenna • Maximum range of antenna Figure 5-3 Effect on the read/write range depending on the antenna alignment SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...
-
Page 18: Antenna Patterns In The Etsi Frequency Band
Antenna patterns 5.2 Antenna patterns in the ETSI frequency band Antenna patterns in the ETSI frequency band Directional radiation pattern ETSI The directional radiation pattern is shown for nominal alignment and a center frequency of 866.3 MHz. The nominal antenna alignment is given when the antenna elevation is provided as shown in the following figure. - Page 19 Antenna patterns 5.2 Antenna patterns in the ETSI frequency band Radiation diagram in the ETSI frequency band on metallic mounting surface (15 cm x 15 cm) Pattern of the vertical plane of the antenna Pattern of the horizontal plane of the antenna Figure 5-5 Directional radiation pattern of the RF622A in the ETSI frequency band on metallic mounting surface...
- Page 20 Antenna patterns 5.2 Antenna patterns in the ETSI frequency band Radiation diagram in the ETSI frequency band on non-metallic mounting surface Pattern of the vertical plane of the antenna Pattern of the horizontal plane of the antenna Figure 5-6 Directional radiation pattern of the RF622A in the ETSI frequency band on non-metallic mounting surface SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...
-
Page 21: Antenna Patterns In The Fcc Frequency Band
Antenna patterns 5.3 Antenna patterns in the FCC frequency band Antenna patterns in the FCC frequency band Directional radiation pattern FCC The directional radiation pattern is shown for nominal alignment and a center frequency of 915 MHz. Figure 5-7 Alignment and reference system of the antenna The half-power beamwidth of the antenna (opening angle) is defined by the angle between the two -3 dB points (corresponding to half the power referred to the maximum power). - Page 22 Antenna patterns 5.3 Antenna patterns in the FCC frequency band Radiation diagram in the FCC frequency band on metallic mounting surface (15 cm x 15 cm) Pattern of the vertical plane of the antenna Pattern of the horizontal plane of the antenna Figure 5-8 Directional radiation pattern of the RF622A in the FCC frequency band on metallic mounting surface...
- Page 23 Antenna patterns 5.3 Antenna patterns in the FCC frequency band Radiation diagram in the FCC frequency band on non-metallic mounting surface Pattern of the vertical plane of the antenna Pattern of the horizontal plane of the antenna Figure 5-9 Directional radiation pattern of the RF622A in the FCC frequency band on non-metallic mounting surface SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...
-
Page 24: Interpretation Of Directional Radiation Patterns
Antenna patterns 5.4 Interpretation of directional radiation patterns Interpretation of directional radiation patterns The following overview table will help you with the interpretation of directional radiation patterns. The table shows which dBi values correspond to which read/write ranges (in %): You can read the radiated power depending on the reference angle from the directional radiation patterns, and thus obtain information on the read/write range with this reference angle with regard to a transponder. -
Page 25: Maximum Read/Write Ranges
Maximum read/write ranges Please observe the installation notes (Page 9) and antenna alignment (Page 15) to achieve the maximum read/write range. The measurements were made under the following conditions: • Maximum possible radiated power of the reader or antenna • With a 3 meter long antenna cable with 1 dB cable loss (article number: 6GT2815-0BH30) •... - Page 26 Maximum read/write ranges Maximum write ranges The antenna requires more power for writing than for reading data. When writing, the maximum range reduces by approximately 30% compared with the read range. SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...
-
Page 27: Technical Data
Technical data Table 7- 1 Technical specifications of the RF622A antenna 6GT2812-2EA0x Product type designation SIMATIC RF622A Radio frequencies Operating frequency • ETSI • 865 to 868 MHz • • 902 to 928 MHz Maximum radiated power • ETSI • ≤... - Page 28 Technical data 6GT2812-2EA0x Electrical data Range See section "Maximum read/write ranges (Page 25)" Impedance 50 Ω Polarization Linear VSWR (standing wave ratio) ≤ 2:1 Power • ETSI • ≤ 2 W • • ≤ 1 W Interfaces Plug connection 30 cm coaxial cable with RP-TNC connector (for connection of the antenna cable) Mechanical specifications Material...
-
Page 29: Dimension Drawing
Dimension drawing Figure 8-1 Dimension drawing RF622A All dimensions in mm SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01... -
Page 31: Approvals & Certificates
Approvals & certificates Table 9- 1 6GT2812-2EA00 Labeling Description Conformity with the RED directive 2014/53/EU Conformity with the RoHS directive 2011/65/EU Table 9- 2 6GT2812-2EA01 Labeling Description FCC CFR 47, Part 15 sections 15.247 Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits Federal Communications for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 32 Approvals & certificates SIMATIC RF622A Operating Instructions, 11/2020, C79000-G8976-C601-01...