Firmware Update - Siemens SIMATIC RF185C Operating Instructions Manual

Service and maintenance

12.3 Firmware update

AutoId OPC UA
status status
-- OpcUa_
BadOutOf
Range /
OpcUa_
Bad
Configura-
tion
Error
-- BadInvalid
Argument
-- BadInvalid
Argument
-- BadInvalid
Argument
-- BadInvalid
Argument
-- Bad
12.3 Firmware update
The following options are available for updating the firmware of the communication modules
and the readers connected to them:
● Using WBM
● Using the TIA Portal (STEP 7 Basic / Professional V15.1 or higher)
In addition, the firmware of the readers connected to the communication module can be
updated. The firmware of the readers is updated using the TIA Portal (STEP 7 Basic /
Professional V15.1 or higher).
These alternative methods are described below.
166
AutoId
text
--
--
--
--
--
--
Error description
No or bad configuration data/parameters were transferred.
Possible cause:
You are accessing a read point that is not configured.
•
A parameter is missing.
The parameter has an invalid format.
The parameter type is invalid.
Unknown parameter.
The command or the frame has an invalid format.
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03