Siemens SIMATIC RF185C Operating Instructions Manual page 67

Main window
The main window shows the contents of the selected menu items. Here, you can configure
the various menu-dependent parameters.
Note
Entering values in text boxes
Apart from manual entry of values, you can also change values with the following buttons:
• Arrow up / down
The value is increased or decreased by one increment.
• PgUp / PgDn
The value is increased or decreased by ten increments.
• Home / End
The value is set to the minimum or maximum value.
Message area
The message area displays all WBM-related error messages and warnings (e.g. transfer
errors).
Information bar
The information bar displays deviations between the settings in the user interface of the
WBM and the configuration stored on the connected communication module. Minor
deviations are designated by a yellow symbol. Changes that lead to a restart of the
communication module are designated by an orange symbol.
While you are accessing the communication module via the WBM, if changes are being
made to the communication module via the connected controller at the same time, these
changes are indicated by a turquoise symbol.
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03
Configuring with the WBM
7.2 The WBM
67