Siemens SIMATIC RF185C Operating Instructions Manual page 206

Syslog messages
B.3 List of Syslog messages
Message text
Example
Explanation
Severity
Facility
Standard
Software and information integrity
Message text
Example
Explanation
Severity
Facility
Standard
Session integrity
Message text
Example
Explanation
Severity
Facility
Standard
Restoration of the automation system
Message text
Example
Explanation
Severity
Facility
Standard
Message text
Example
Explanation
Severity
Facility
Standard
206
{Protocol}: User {User name} has initiated a reset to factory defaults.
WBM: User admin has initiated a reset to factory defaults.
User has initiated a reset to factory settings.
Info
local0
IEC 62443-3-3 Reference: SR 2.12
Configuration integrity verification failed.
Configuration integrity verification failed.
Configuration integrity verification failed.
Error
local0
IEC 62443-3-3 Reference: SR 3.4
{Protocol}: Session ID verification failed.
WBM: Session ID verification failed.
Session ID is invalid.
Error
local0
IEC 62443-3-3 Reference: SR 3.8
{Protocol}: Firmware {Version} was activated.
WBM: Firmware V2 was activated.
Firmware successfully activated.
Notice
local0
IEC 62443-3-3 Reference: SR 7.4
{Protocol}: Firmware activation failed.
WBM: Firmware activation failed.
Firmware activation failed.
Error
local0
IEC 62443-3-3 Reference: SR 7.4
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03