Siemens SIMATIC RF185C Operating Instructions Manual page 86

Configuring with the WBM
7.3 The menu items of the WBM
Parameter
Channel per inter-
face
Single channel
XML channel
In the "XML channel" area, you can define which events are transmitted via the selected
XML channel.
Table 7- 14
Parameter
Presence events
Tag data events
Log events
Interface (1-4)
86
Description
Click on the button to activate communication via all XML channels. This func-
tion automatically presets the interface parameters in the "XML channel" are-
as.
With this function, communication to the interfaces is performed via different
XML channels.
Click the button to enable communication via one XML channel. This function
automatically presets the interface parameters in the "XML channel" area.
With this function, communication for both interfaces is performed via one
XML channel.
Description of the parameters
Description
Information on the presence of connected readers or changes made to them
Transponder data of all registered transponders
Log entries
Definition of which interfaces are used to transmit the selected events to the
controller.
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 04/2020, C79000-G8976-C512-03