Right Side Panel - Keysight B Series User Manual

Preparing for Initial Use of Your New FieldFox
Take the FieldFox Tour

Right Side Panel

Connector Description
Ethernet cable connector to read trace data using the FieldFox Data Link
Software and connect to the FieldFox remotely.
Download the latest version of the software at:
www.keysight.com/find/fieldfoxsupport
IF Out used in SA mode for external signal processing.
Frequency Reference Source Output
Trigger Output (ERTA mode).
Secure Digital slot. Use to extend the memory of the FieldFox.
The mini-USB port can be connected to your PC's standard USB port to
send SCPI commands.
Two standard USB connectors used to connect a power sensor for Power
Meter Mode. Also used to save files to a USB flash drive.
Keysight N9938-90003 User's Guide
IMPORTANT!
It is recommended that only USB
certified cables are used with the FieldFox.
IMPORTANT!
It is recommended that only USB
certified cables are used with the FieldFox.
Learn More:
"LAN Settings" on
page 254
"IF Output" on
page 130
Chapter 24, "ERTA
(Extended Range
Transmission Analysis)
Mode - Option 209", on
page 533
"Saving and Recalling
Files" on page 266
Chapter 30, "Using the
Mini-USB Port to send
SCPI Commands and
Queries", on page 711
"Saving and Recalling
Files" on page 266
31