Emf Features - Keysight B Series User Manual

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
This section consists of:
—
— EMF Setup Procedure

EMF Features

EMF has the following features:
EMF Measurement Results:
—
— Antenna control over X, Y, and Z antenna factors downloaded via USB
— Pass/Fail limit testing supported
— External PC not required
EMF uses the following data formats:
— Field Strength units:
170
"EMF Features" on page 170
Measure and display corrected field strength in RMS average power
— dBµV/m – For use with E-field signals
— dBµA/m – For use with H-field signals
— dBG – dB Gauss
— dBpT - dB Tesla
Keysight N9938-90003 User's Guide