Using The Antenna/Cable Editor - Keysight B Series User Manual

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings
The following menu appears when any of the above Antenna or Cable softkeys
are pressed:
—
—
—
—
—
—
When finished, press Back to return to the previous menu.

Using the Antenna/Cable Editor

The Antenna Editor and the Cable Editor menus are very similar. Both tables
include header information, and a Frequency/Value table.
120
—SrcSide Antenna Off / On
transmit.
—RcvrSide Antenna Off / On
receive.
—SrcSide Cable Off / On
Source side.
—RcvrSide Cable Off / On
Receiver side.
—View Corrections ON OFF
Antenna/Cable corrections. This is a composite of all cable/antenna
corrections that are currently applied. Available as a useful visual aid,
the zero "dB" level (no net correction) is mapped to appear at the
-50 dBm on-screen level.
Antenna/Cable ON OFF
Edit Antenna/Cable Edit an Antenna/Cable Correction table. See Using the
Antenna/Cable Editor (below) for more information.
New Create a new Antenna/Cable. See Using the Antenna/Cable Editor
(below) for more information.
Save Antenna/Cable Save the modified Antenna/Cable to a file on the
specified Storage Device.
Recall Antenna/Cable
specified Storage Device.
Storage Device Choose from: Internal, USB, SD. Learn more about these
selections in "Set File Type and Select Device" on page
Edit/Recall an Antenna file to be used to
Edit/Recall an Antenna file to be used to
Edit/Recall a Cable file to be used on the
Edit/Recall a Cable file to be used on the
Turn ON and OFF Pink Trace -
Turn correction ON or OFF for this Antenna/Cable.
Read an existing Antenna/Cable file from the
Keysight N9938-90003 User's Guide
271.