Preferences; Quick Settings Table - Keysight B Series User Manual

System Settings

Preferences

Figure 9-6 FieldFox Frequency Converter (Freq Extend) On And Corrections (eCorr)
Enabled (RTSA mode shown; other compatible modes are similar.)
Preferences
FieldFox preferences are settings that survive a shut down. When your FieldFox
is turned OFF, then back ON, these settings remain. All preference settings can
be restored to their factory defaults. Learn how in
Preferences" on page
There are two ways to make FieldFox preference settings:
— From softkey selections throughout the FieldFox menu structure. Do this to
— From the Quick Settings table.
— Also, refer to:

Quick Settings Table

All preferences can be set from the Quick Settings table. They are immediately
saved as Preferences when
230
232.
temporarily try a setting, then press
in the next section.
"Audio (Volume) Control" on page 218
(Settings)" on page 219.
Save Current
Done is pressed.
Keysight N9938-90003 User's Guide
"Save and Reset
Preferences. Learn how
and "Display