Cat (Distance Units) - Keysight B Series User Manual

System Settings

CAT (Distance Units)

— State (.sta) – Enables/disables .sta files as a group file to be saved when
— Image (.png) – Enables/disables .png files as a group file to be saved when
— CSV Data (.png) – Enables/disables .csv data files as a part of the group
— S1P Data (.s1p) – Enables/disables ..s1p data files as a part of the group
— S2P Data (.s2p) – Enables/disables .s2p data files as a part of the group
— Matalab Data (.mat) – Enables/disables .mat data files as a part of the
— SDF Data (.sdf) – Enables/disables .sdf data files as a part of the group files
CAT (Distance Units)
Choose the CAT distance units (i.e., Meters (default), Feet, Inches). See
Units" on page
How to select CAT distance units:
— Press System 7
— Then
— Then
— Then
— Then
Keysight N9938-90003 User's Guide
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
group files to be saved when the Quick Save (Save/Recall 9) hardkey is
pressed for ~3 seconds.
to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for ~3
seconds.
61.
Preferences
Preferences
Edit for each of the following:
— Distance Units:
——Meters (default)
——Feet
——Inches
— TDR Sweep:
——Cable (default and the most accurate)
——Auto
Done Edit (after each change in setting)
"DTF
241