What Is A 'Peak - Keysight B Series User Manual

Figure 8-6 CAT Mode Mkr5 and Mkr6 Search Example

What Is a 'Peak'

You define what the FieldFox considers a "peak" by setting the Peak Threshold and Peak Excursion
and for I/Q Analyzer Only Cont Peak Search.
These two peak criteria settings are set individually for each trace and for each mode (CAT, SA, or
NA).
These settings do NOT survive a FieldFox or Mode Preset.
The Peak Threshold and Excursion settings are NOT available in DTF
measurements. To make these settings, create a non-DTF CAT mode
measurement, then change the measurement back to DTF.
How to set Peak Criteria
— Press Mkr ->/Tools.
— In CAT and NA modes:
— Then Peak Search.
— Then Peak Criteria
Keysight N9938-90003 User's Guide
Data Analysis Features
All about Markers
201