Press Printing; How To Print The Current Screen Or A Saved File - Keysight B Series User Manual

File Management

Press Printing

Press Printing
The current screen or selected files can be printed using a PCL-compatible
printer (like older HP Deskjet printer) connected to one of the FieldFox USB
ports. Newer PCL3GUI photo and all-in-one printers are NOT supported.
Measurements can also be printed using the FieldFox Data Link software.

How to print the current screen or a saved file

To save ink, first select an outdoor (white background) display color. Learn how
in
— Connect the printer to a FieldFox USB port. The print softkey will appear
— Then press Save/Recall 9
— Then
— Make other print settings as desired.
280
"Display Colors" on page
ONLY when a compatible printer is connected.
Print and choose from the following:
— Printer & Page\nSetup
configured properly. The Status line should read "Ready'.
— Select Files\nfor Printing
that are stored on the Internal drive. Images can NOT be printed from
the USB and SD card.
— Edit the Quick Settings table to select up to FOUR Rows and FOUR
Columns for up to 16 total images to be printed on a single page.
— If necessary, edit the filenames to be printed.
— Select Done. Then
——Print Current Screen
using the selected Printer and Page Setup settings.
219.
- Confirm that the printer is connected and
- Print up to 16 *.PNG images on one page
Print Selected\nFiles
– Immediately prints the FieldFox screen
Keysight N9938-90003 User's Guide
to begin printing.