Edit Keywords; Prefixes And Suffixes For Filenames - Keysight B Series User Manual

File Management
Saving and Recalling Files

Edit Keywords

The preselected keywords (FILE, SITE, and so forth) can be edited to meet your
specific needs. Your keywords will remain in the FieldFox until you change
them. Keywords are limited to 30 characters.
How to edit keywords
— Press Save/Recall 9
— Then
— Then
— Then
— Use the
— When a keyword is selected, then press Edit.
— Then choose from the following:
How to move the cursor:
— Use the rotary knob to move the cursor along the same row. The cursor will
— Use the
When the selected keyword is complete:
— Press
— Press

Prefixes and Suffixes for Filenames

The prefix and suffix (Auto Append) can be used together to organize files.
Once set and enabled, they are automatically entered as the beginning (Prefix)
and end (Suffix - using Auto Append) of a filename when performing a Save
Keysight N9938-90003 User's Guide
More

Edit Keywords

Next Page and Previous Page
arrows to select a keyword to edit.
— Press Select to add the cursor character to the end of the selected
keyword.
— Press Backspace
selected keyword.
— Press Shift to change from upper-case to lower-case and vice versa.
— Press Alt Keywords
change rows when it comes to a row end.
arrows to move the cursor up and down between rows.
Done to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.
Cancel to close the labeler without saving changes.
to view all keywords.
to erase the last character from the end of the
to toggle through different keyword choices.
277