Service Diagnostics; System Information; Event Log; Battery - Keysight B Series User Manual

System Settings

Service Diagnostics

Service Diagnostics
— The Service diagnostics menu is generally used to display service-related

System Information

The System information table shows important information about your
FieldFox. The following is the most useful information:
— Model Number – FieldFox model
— Serial Number – Identification number of your FieldFox
— Firmware Release – The currently installed version of software. Check to
— Network Identity – The network name and current IP address of your
— Reflectometer Factory Cal - The Factory (CalReady) Calibration shows the

Event Log

The Event Log shows the information that has appeared on the FieldFox
screen. The most recent information is at the top of the table.
Press

Battery

Learn more in
729

Internal Temperatures

Learn about the importance of the internal FieldFox temperatures in
Temperature Protection" on page 22

Erase User Data

All data that you have written to the FieldFox can be erased with the press of a
button. You would do this if your FieldFox is located in a secure environment
and must be routinely erased of sensitive data.
Keysight N9938-90003 User's Guide
information. To access these menu items, press System 7 then
Diagnostics.
see if you have the latest firmware at:
www.keysight.com/find/fieldfoxsupport
FieldFox.
date and time that the factory cal was performed for each test port and the
Thru connection. The format is P1 <date time>, P2 <date time>, P1-P2
<date time>. The factory calibration is updated when you send your
FieldFox to Keysight for Instrument Calibration. Learn more in
Calibration" on page 763.
Clear Events to erase this information.
Chapter 32, "Working with the Lithium-Ion Battery", on page
.
.
Service
"Instrument
"FieldFox High
259