Safety Considerations
Certification and Compliance Statements
Certification and Compliance Statements
Certification
Keysight Technologies, Inc. certifies that this product met its published
specifications at the time of shipment from the factory. Keysight Technologies,
Inc. further certifies that its calibration measurements are traceable to the
United States National Institute of Standards and Technology, to the extent
allowed by the Institute's calibration facility, and to the calibration facilities of
other International Standards Organization members.
Manufacturer's Declaration
This product has been designed and tested in accordance with accepted
industry standards, and has been supplied in a safe condition. The
documentation contains information and warnings that must be followed by
the user to ensure safe operation and to maintain the product in a safe
condition.
Declaration of Conformity
Should the Declaration of Conformity be required, visit:
http://www.keysight.com/go/conformity.
For more information, see
EMC
Complies with the essential requirements of the European EMC Directive as
well as current editions of the following standards (dates and editions are cited
in the Declaration of Conformity):
— IEC/EN 61326-1
— CISPR Pub 11 Group 1, class B
— AS/NZS CISPR 11
— ICES/NMB-001
This ISM device complies with the Industry Canada Interference-Causing
Equipment Standard (ICES-001);
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
Safety
Complies with the European Low Voltage Directive
— IEC/EN 61010-1
— Canada: CSA C22.2 No. 61010-1
300
"Where to Find the Latest Information" on page
Keysight N9938-90003 User's Guide
3.