Environmental Requirements; Electrical Requirements; Electrostatic Discharge (Esd) Precautions; Fieldfox Markings - Keysight B Series User Manual

Safety Considerations

Environmental Requirements

Environmental Requirements
Refer to the FieldFox Specifications in
page

Electrical Requirements

The FieldFox allows you to use either the lithium-ion battery or the AC/DC
adapter - both are included.

Electrostatic Discharge (ESD) Precautions

The FieldFox was constructed in an ESD protected environment. This is
because most of the semiconductor devices used in this instrument are
susceptible to damage by static discharge.
Static charges are generated in numerous ways, such as simple contact,
separation of materials, and normal motions of persons working with the
FieldFox. To prevent instrument damage, practice industry accepted
techniques for handling static sensitive devices when using the FieldFox.
Very often, coaxial cables and antennas also build up a static charge, which, if
allowed to discharge by connecting to the FieldFox, may damage the
instrument input circuitry. To avoid such damage, it is recommended to
dissipate any static charges by temporarily attaching a short to the cable or
antenna prior to attaching to the instrument.

FieldFox Markings

The table below lists the definitions of markings that may be displayed on or
with the product.
294
761.
The CSA mark is a registered trademark of CSA International.
The RCM Mark is a registered trademark of the Australian Communications and
Media Authority.
"Specifications/Data Sheet" on
Keysight N9938-90003 User's Guide