Maintenance Task Schedule; How Often Should Maintenance Tasks Be Performed - GE Versana Balance Basic Service Manual

10-4 Maintenance task schedule

10-4-1 How often should maintenance tasks be performed?

NOTE:
NOTE:
Service at Indicated
Time
Clean Probes
Inspect AC Mains Cable
Inspect Cables and
Connectors
Clean Console
Clean Monitor
Clean Filters
Versana Balance – Basic Service Manual
5808768-100 English Rev.9
The Care and Maintenance task schedule (provided in
Table 10-1 on page 10-5) specifies how often your Versana
Balance should be serviced and outlines items requiring special
attention.
It is the customer's responsibility to ensure the Versana Balance
care and maintenance is performed as scheduled in order to
retain its high level of safety, dependability and performance.
Your GE Service Representative has an in-depth knowledge of
your Versana Balance and can best provide competent, efficient
service. Contact GE for coverage information and/or price for
service.
The service procedures and recommended intervals shown in
the Care and Maintenance Task Schedule assumes that you
use your Versana Balance for an average patient load (10-12
per day) and not use it as a primary mobile Ultrasound system
which is transported between diagnostic facilities.
If conditions exist which exceed typical usage and patient load,
then it is recommended to increase the care and maintenance
frequencies.
Table 10-1: Customer Care Schedule
Daily Weekly
•*

Maintenance task schedule

Per
Facilities
QA
Monthly Program
•
•
•
•
•
System view
Notes
* or before each use
10-5