Front Display Assembly Replacement Procedure - GE Venue Go Service Manual

P R E L I M I N A R Y
D 5813707-100, R
IRECTION
8-2-11

Front Display Assembly Replacement Procedure

8-2-11-1 Tools
Phillips screwdriver of appropriate size
FRU Part #
Table 9-16
Refer to
8-2-11-2 Time Required
5 min
8-2-11-3 Preparations
1.) Shut down the Venue Go™ ultrasound unit, as described in
2.) Prepare stable flat surface covered with a soft material (such as foam or thick cloth) to prevent
scratches to the display.
3.) Dismount Venue Go™ system from cart as described in
and place it on a previously prepared surface with the display facing down.
8-2-11-4 Front Display Assembly Removal Procedure
1) Remove back cover.
•
2) Remove back speakers.
•
3.) Remove the C-FEB
•
4.) Front display is now clear of all elements.
Note: The WiFi antennas are coming pre-assembled as part of the Front display module.
2
EVISION
.
on page 9-17
Back Cover Removal Procedure
Speakers Removal Procedure
C-FEB Removal Procedure
Figure 8-108 Front Display Assembly Removed
Chapter 8 - Replacement Procedures
V ™ S
ENUE
Power Shutdown.
Mounting / Dismounting System on Cart
M
ERVICE ANUAL
8-31