Ac/Dc Psu And Split Cable Replacement Procedure - GE Venue Go Service Manual

P R E L I M I N A R Y
D 5813707-100, R
IRECTION
8-2-25

AC/DC PSU and Split Cable Replacement Procedure

8-2-25-1 Tools
Phillips screwdriver of appropriate size
Flat head screwdriver
FRU Part #
Refer to
8-2-25-2 Time Required
5 min
8-2-25-3 Preparations
1.) Shut down the Venue Go™ ultrasound unit, as described in
2.) Prepare stable flat surface covered with a soft material (such as foam) to prevent scratches to the
display.
3.) Dismount Venue Go™ system from cart and place it on a previously prepared surface with the
display facing down.
PSU and Split Cable
8-2-25-4
4.) Release 2 screws holding the PSU plastic cover, and remove the cover. Use a flat head screw
driver if required.
8-60
2
EVISION
Table 9-16 .
on page 9-17
Removal Procedure
Figure 8-143 Remove Power Supply Plastic Cover
Chapter 8 - Replacement Procedures
V ™ S
ENUE ERVICE
Power Shutdown .
M
ANUAL