GE Venue Go Service Manual page 210

P R E L I M I N A R Y
D 5813707-100, R
IRECTION
8-2-2-4 Batteries Removal Procedure
1) Move the bottom probe locking lever to its locked position.
2) Raise the system support frame (Kick Stand) to vertical position.
3) Open the battery compartment cover by moving the latch to the right.
4.) Remove the battery.
8-2-2-5 Batteries Installation Procedure
1.) Slide in the battery towards the power connector.
2.) Position the battery properly in its compartment.
3.) Close the battery compartment cover.
4.) Switch On the battery power switch.
5.) Close the battery power switch silicon cover.
8-4
2
EVISION
Figure 8-72 Opening Battery Compartment Cover
Chapter 8 - Replacement Procedures
V ™ S M
ENUE ERVICE ANUAL