C-Feb Heat Sync Assembly Replacement Procedure - GE Venue Go Service Manual

P R E L I M I N A R Y
D 5813707-100, R
IRECTION
8-2-9

C-FEB Heat Sync Assembly Replacement Procedure

8-2-9-1 Tools
Phillips screwdriver of appropriate size
FRU Part #
Table 9-16
Refer to
8-2-9-2 Time Required
5 min
8-2-9-3 Preparations
1.) Shut down the Venue Go™ ultrasound unit, as described in
2.) Prepare stable flat surface covered with a soft material (such as foam or thick cloth) to prevent
scratches to the display.
3.) Dismount Venue Go™ system from cart as described in
and place it on a previously prepared surface with the display facing down.
C-FEB Heat Sync Assembly
8-2-9-4
1) Remove back cover.
•
2) Remove C-PSB.
•
3) Remove the fan.
•
2
EVISION
.
on page 9-17
Back Cover Removal Procedure
C-PSB Removal Procedure
Fan Removal Procedure
Chapter 8 - Replacement Procedures
Removal Procedure
V ™ S
ENUE
Power Shutdown.
Mounting / Dismounting System on Cart
M
ERVICE ANUAL
8-25