GE Venue Go Service Manual page 241

P R E L I M I N A R Y
D 5813707-100, R
IRECTION
3.) Connect the ground cable: Attach the grounding-cable's rings and the cable clamp to the dedicated
Assy, as shown in the picture. Make sure the ring lugs are physically touching the chassis.
4.) Secure the two cable clamps using two screws. Fasten the screws by 0.62 torque.
5.) Connect the speakers' cable to the C-BEB.
6.) Install the fan.
•
7.) Install back cover.
•
2
EVISION
Figure 8-113 Speakers Earth Cable
Fan Installation Procedure
Back Cover Installation Procedure
Chapter 8 - Replacement Procedures
V ™ S M
ENUE ERVICE ANUAL
8-35