1715 Analog Output Module - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

Table 57 - Analog Input Module Status Indicators
Indicator
Run
Channel 0...7, 8...15

1715 Analog Output Module

State
Steady off
Steady green
Flashing green
Steady off
Steady amber
Flashing amber
Steady red
The analog output module has these status indicators.
A
B
C
D
Indicator
A
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
Description
No power; no backplane communication - No power
or the module is not communicating over the
backplane.
Connected - The module has at least one established
connection.
No connections - The module is communicating over
the backplane, but there are no established
connections.
No signal, no backplane communication - There is no
signal on the channel or the module is not
communicating over the I/O backplane.
Signal present - A valid signal has been detected
(that is, measured signal >= 0.4 mA).
Field fault - A field fault has been detected on this
channel.
Fault - A fault has been detected on this channel.
ANALOG OUTPUT
1715-OF8I
Healthy
Ready
Run
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
Description
Healthy - general status display
Appendix A Status Indicators
32089
255