1715-Ib16D - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

Appendix F I/O Tag Definitions
Table 63 - Input
Tag Name Data Type
PortA2ANStatus SINT, enumerated
PortB1ANStatus SINT, enumerated
PortB2ANStatus SINT, enumerated
PortA1Speed DINT
PortA2Speed DINT
PortB1Speed DINT
PortB2Speed DINT
CIPTimeouts DINT
CIPConnections DINT
CIPLostPackets DINT
TCP Connections DINT
CUPUtilization DINT

1715-IB16D

Table 64 - 16-channel Digital Input, Simplex
Tag Name Data Type
Fault DINT, Binary
Data INT
Status DINT, bit-field
280
Definition
5-255
Enumerated adapter Ethernet port auto-negotiation status:
Value
0
1
2
3
4
5-255
Enumerated adapter Ethernet port auto-negotiation status:
Value
0
1
2
3
4
5-255
Enumerated adapter Ethernet port auto-negotiation status:
Value
0
1
2
3
4
5-255
Interface speed in Mbps that is in use, for example, 10 Mbps or 100 Mbps, or 0 when port is active
Interface speed in Mbps that is in use, for example, 10 Mbps or 100 Mbps, or 0 when port is active
Interface speed in Mbps that is in use, for example, 10 Mbps or 100 Mbps, or 0 when port is active
Interface speed in Mbps that is in use, for example, 10 Mbps or 100 Mbps, or 0 when port is active
Total of all Connection Manager object Connection Timeout values
Total number of active CIP connections
Total of all CIP packets
Total of all TCP connections
Echo of Connection Manager object CPU_Utilization attribute
This section describes the tags that are associated with the 1715-IB16D module.
Definition
Module fault bit:
Input state, one bit per channel for channels 0...15:
Redundancy and power status:
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
Undefined
Description
Auto-negotiation in progress
Auto-negotiation of duplex and speed detection failed; by using a default
value for speed and duplex
Auto-negotiation of duplex but detected speed; by using a default value for
duplex
Successfully negotiated duplex and speed
Auto-negotiation not attempted, by using forced speed and duplex values
Undefined
Description
Auto-negotiation in progress
Auto-negotiation of duplex and speed detection failed; by using a default
value for speed and duplex
Auto-negotiation of duplex but detected speed; by using a default value for
duplex
Successfully negotiated duplex and speed
Auto-negotiation not attempted, by using forced speed and duplex values
Undefined
Description
Auto-negotiation in progress
Auto-negotiation of duplex and speed detection failed; by using a default
value for speed and duplex
Auto-negotiation of duplex but detected speed; by using a default value for
duplex
Successfully negotiated duplex and speed
Auto-negotiation not attempted, by using forced speed and duplex values
Undefined
0 when a module is present and reporting valid data, OxFFF_FFFF when no
module is present, no Logix connection exists, or reported data is valid
0 = Off/de-energized
1 = On, energized