Product Installation; Installation Of Product, This Is Achieved Using The Pcdc Website; Eds Files - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

Chapter 6 Configure the Redundant I/O System

Product Installation

158
See the latest certifications for software and firmware at
rok.auto/certifications. See the TÜV website at
2 certification listings.
The Add-on Profiles can be found on the Product Compatibility and Download
Center at rok.auto/pcdc.
Once the Add-on Profiles are installed on your computer, they can be accessed
through RSLogix 5000 software and/or the Logix Designer application.
With the Add-on Profiles, you are able to do the following:
• Add and configure the redundant adapter pair.
• Add and configure I/O modules in Simplex mode.
• Add and configure I/O modules in Duplex mode.
• Monitor diagnostics for I/O modules.
To install the Add-on Profiles, follow these steps.
IMPORTANTZ Make sure any instances of RSLogix 5000 programming software
or Logix Designer application are shut down before beginning.

Installation of product, this is achieved using the PCDC Website

To download the Add-on Profiles for the 1715 adapter and I/O modules. go to
the Product Compatibility and Download Center at rok.auto/pcdc.

EDS Files

The 1715 modules contain the EDS files for installation into RSLinx software.
You can right-click the module in RSLinx Classic software and upload the EDS
file into RSLinx Classic software without downloading EDS files from the
typical download site. Follow these steps to upload from RSLinx Classic
software.
1. Open RSLinx Classic software.
2. In the RSWho tree, right-click the Ethernet adapter and choose Upload
EDS file from device.
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
http://www.tuvasi.com for SIL