1715-If16 Analog Input Module; Add The Analog Input Module To The Project; Step 1: Add The Analog Input Module In Duplex Mode - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

1715-IF16 Analog Input
Module

Add the Analog Input Module to the Project

In this section, you do the following:
• Add a 1715-IF16 analog input module in Duplex mode to the project.
• Add a 1715-IF16 analog input module in Simplex mode to the project.

Step 1: Add the Analog Input Module in Duplex Mode

Add a 1715-IF16 Analog Input module in Duplex mode to the project.
1. Add the new module, see
The Select Module dialog box appears.
2. Expand the Analog module list, select the 1715-IF16 module, and click OK.
The General tab appears.
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
Chapter 6 Configure the Redundant I/O System
page 177.
189