Installation Instructions - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

Installation Instructions

Topic
Before You Begin
System Hardware Components
System Software
Module Placement
Install Summary
Product Dimensions
DIN Rail Assembly
Install the Power Supply
Install the Adapter Base Unit
Install the I/O Base Unit
Install Termination Assembly to I/O Base Unit
Mount I/O Expansion Cable
Wire the Adapter
Connect Field Wiring
Connect the Adapter to the Ethernet Network
Module Keying
Electronic Keying
Install the Adapters
Assign an IP Address
Install the I/O Modules
Install Slot Filler Covers
Remove Modules
This chapter explains how to build the 1715 Redundant I/O System. These
installation instructions include how to build the backplane by connecting the
adapter and I/O base units and mounting them on DIN rails within a cabinet,
how to install and wire the termination assemblies, how to mount the adapter
and the I/O modules onto the system, and how to use expansion cables to allow
for additional space requirements for the system within an enclosure.
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
2
Chapter
Page
36
38
51
53
55
56
57
60
61
62
64
67
72
74
96
97
100
101
104
110
112
112
31