1715-N2T And 1715-N2S Slot Filler Covers; Power Requirements - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

Chapter 2 Installation Instructions
50

1715-N2T and 1715-N2S Slot Filler Covers

Slot filler covers are available in two sizes to cover empty slots in your system.
Use the tall cover (catalog number 1715-N2T) when no termination assembly is
present. Use the short cover (catalog number 1715-N2S) when a slot has a
termination assembly, but no module.
Module Status
Module Status
Redundancy Status
Redundancy Status
Network Status
Network Status
Rack Status
Rack Status
Ethernet 1
Ethernet 1
Ethernet 2
Ethernet 2
Reset
Reset

Power Requirements

A 24V DC power supplied is required. See
for complete details.
ATTENTION: To comply with the CE Low Voltage Directive (LVD), all
connections to this equipment must be powered from a source
compliant with the following:
• Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV)
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
TERMINAL IDENTITY
CH1 CH1 CH1 CH1
CH1 CH1 CH1 CH1
Slot Filler Covers
AOTA
Dual.
Install the Power Supply on page 60
32086 M
32078 M