Multi-Point Network Communication Connections; Field-Side Power; Removal And Insertion Under Power (Riup) Fuses - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

Chapter 2 Installation Instructions
WARNING: If you connect or disconnect the communication cable with power applied to this module or any device on the
network, an electrical arc can occur. This could cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before proceeding.
WARNING: If you connect or disconnect wiring while the field-wire power is on, an electrical arc can occur. This could
cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before
proceeding.
WARNING: If you insert or remove a base unit or termination assembly while power is applied, an electrical arc can occur.
This could cause an explosion in hazardous location installations.
Be sure that power is removed before proceeding.
WARNING: Do not remove or replace fuses when energized. This could cause an explosion in hazardous location
installations.
Be sure that power is removed or the area is nonhazardous before proceeding.
34

Multi-point Network Communication Connections

Field-side Power

Removal and Insertion Under Power (RIUP) Fuses

Rockwell Automation Publication 1715-UM001J-EN-P - December 2020