Diagnostic Latch Information - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

2. Click Reset for a particular point on the module to reset a fuse.
3. Click OK.

Diagnostic Latch Information

Diagnostic latching lets this module latch a fault in the set position once it has
been triggered, even if the error condition causing the fault to occur
disappears.
The Reset Diagnostic Latch service can clear latched diagnostic features.
IMPORTANT Diagnostic latches are also reset through a software reset or
when the power is cycled for the I/O module.
Follow these steps to enable diagnostic latch of information.
1. On the Module Properties dialog box, click the Configuration tab.
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
Chapter 4 Digital I/O Operation
129