Wire The Adapter; Connect The 24V Dc System Power - Rockwell Automation Allen-Bradley 1715-AENTR User Manual

Chapter 2 Installation Instructions

Wire the Adapter

72
The 1715 adapter base unit has a series of screw terminal blocks to terminate
power connections to ease cable installation.

Connect the 24V DC System Power

The 1715 modules are designed to operate from two independent 24V DC
sources with a common return. Power is connected to the two plugs, 'PWR-1'
and 'PWR-2' on the adapter base plate. Power is distributed to the I/O modules
through the base units.
Figure 28 - Connect System Power
C
o
m
m
o
n
Pwr1
ATTENTION: To comply with the CE Low Voltage Directive (LVD), all
connections to this equipment must be powered from a source
compliant with safety extra low voltage (SELV) or protected extra low
voltage (PELV)
Rockwell Automation Publication 1715-UM001J-EN-P - December 2020
Connect cable plug assembly to
the adapter base connector.
Adapter Base Connector
32060 M
C
o
m
m
+24V DC +24V DC
o
n
Pwr2
32065 M1