Troubleshooting - Assa Abloy Besam SW300 Installation And Service Manual

19 Troubleshooting

19 Troubleshooting
Fault
The door does not open
The motor does not start
The motor starts but the
door does not open
The door does not close
82
Possible reasons why
Control switch is set to OFF
Electrical power is missing
Activation unit does not function
Presence detection is activated
KILL activated
Mechanical lock is locked
Something jammed beneath the door
Electric striking plate is binding
Arm system has come loose
Control switch is set to HOLD OPEN
Presence impulse is activated
Something jammed beneath the door
Issue 2014-10-28
Remedies/Explanations
Change the setting of the control switch
Check the electrical power power switch
Strap impulse inputs
Check that there are no objects in the detec-
tion zone
Deactivate KILL
Unlock the lock
Remove object
Select lock release
Adjust striking
Use the tool and the nib, put the door in re-
quired open position. Tighten the arm system.
Change the setting of the OFF/AUTO/OPEN
switch
Remove objects in the detection zone
Remove object
1007913-EI-9.0