Summary of Contents for Assa Abloy SARGENT Powerglide 281 Series
Page 1
Installation Instructions 281 Powerglide Series Closer with Regular Arms (Without Holder) 281 Series Non Sized Adjustable from Sizes 1 thru 6 Standard Application (Type 25-O Arm) Use instructions on page 3 Closer mounted on hinge side of door. NOTE: For 08 and OLC type arms mounting, see data sheets provided with arm.
Page 2
281 Series Closer with Regular Arms Installation Instructions To Determine Your Hand of Door LEFT RIGHT HAND DOOR HAND DOOR PULL PULL HINGE SIDE HINGE SIDE STOP (PUSH) SIDE STOP (PUSH) SIDE Spring Power Adjustment Adjust spring according to the Standard and Top Jamb Applications appropriate application chart.
Page 3
281 Series Closer with Regular Arms Installation Instructions 281 Standard Application Instructions 1. Prepare door and frame. Dim B #12 x 1-1/2 Wood Screws or Max Door #12-24 x 5/8 Flat Head Mounting Dim A Dim B Machine Screws Type Opening 2"...
Page 4
281 Series Closer with Regular Arms Installation Instructions 281 Top Jamb Application Instructions Max Door 1. Prepare door and frame. Arm Type Reveal Depth Dim A Opening "O" Arm 0" to 2" 9-5/16" 180° #12 x 1-1/2 Wood Screws or #12-24 x 5/8 Flat Head Machine Screws "OZ"...
Page 5
281 Series Closer with Regular Arms Installation Instructions 281 Parallel Arm Application Instructions Hinge Pivot: 1. Prepare door and frame. Butt, Offset Pivots, Swing Clear, Center hung or Invisible hinges 2-1/2" Max Door Dim A Dim B 1-1/4" Opening 1/2" #12 x 1-1/2 Wood Screws or 120°...
Page 6
281 Series Closer with Regular Arms Installation Instructions Final Adjustment and Regulating Procedure Delayed Action Valve (Optional) Delayed Action Range Backcheck Valve Closing Speed Range Backcheck Range 1/4" Spring Power Latching Adjustment Screw Speed Valve Latching Speed Range Closing Speed Valve Regulating Door Speed and Latching as Needed Regulating Backcheck...
Page 7
281 Series Closer with Regular Arms Installation Instructions Using Mortise Nuts with Sargent Door Closers NOTES: 1. See instruction or data sheet packed with door closer for dimensions locating the closer body and foot on door and frame. 2. Mortise nut shown is designed for unreinforced metal doors. 3.
Page 8
WARNING This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov. WARNING Attention Installer: Improper installation may result in damage to the product and void the factory warranty.